Condensate Polishing Unit

Condensate Polishing Unit

The condensate polishing units are used in refineries and petrochemicals, fertilizer to polish the process condensate and surface condensate for reuse. During the process, the condensate picks up contaminant like Iron, Copper, Oil, Silica etc., and therefore, needs to be treated by mixed bed polisher.

Paramount Limited has supplied offline CPU for Refineries, Fertilizer plants, Petrochemical Industry. Paramount Limited has so far done large condensate polishing unit of 2 x 250 m3/hr.

The condensate polishing units are also used in refineries and petrochemicals, fertilizer to polish the process condensate and surface condensate for reuse.

Condensate_Polishing_Unit

During the process, the condensate picks up contaminant like Iron, Copper, Oil, Silica etc., and needs to be treated by mixed bed polisher.

The condensate polisher typically consists of a heat exchanger activated carbon filter and mixed bed polisher. The heat exchanger is used to reduce the temperature to about 40º-50º C, due to the limitations of temperature for anion exchange resin. In some cases, a cation exchanger is also installed preceding the mixed bed exchanger. After the mixed bed polisher, the condensate is sent back for reuse.

Paramount has so far done large condensate polishing unit of 2×250 m3/hr.

The common configuration is shown below.

Contact Us At

Address

Paramount Limited, Paramount Complex, Near Natubhai Circle, Race Course, Vadodara, Gujarat - 390007

Phone Number

Vadodara: +91-0265-2397111
New Delhi: +91-11-26186525, 26186369
Mumbai: +91-22-24078105

Email Address

Vadodara: sales@paramountlimited.com
New Delhi: delhi@paramountlimited.com
Mumbai: mumbai@paramountlimited.com